AMIS-40616 Datasheet, PDF (16/17 Pages) AMI SEMICONDUCTOR – LIN Transceiver with 5V Voltage Regulator

AMIS-40616
LIN Transceiver with 5V Voltage Regulator
Data Sheet
Table 13: Soldering Process
Package
Wave
Soldering Method
Re-flow ⁽¹⁾
BGA, SQFP
HLQFP, HSQFP, HSOP, HTSSOP, SMS
PLCC ⁽³⁾, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
Not suitable
Not suitable ⁽²⁾
Suitable
Not recommended ⁽³⁾⁽⁴⁾
Not recommended ⁽⁵⁾
Suitable
Suitable
Suitable
Suitable
Suitable
Notes:
1. All SMD packages are moisture sensitive. Depending upon the moisture content, the maximum temperature (with respect to time) and body size of the package,
there is a risk that internal or external package cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
dry pack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”.
2. These packages are not suitable for wave soldering as a solder joint between the PCB and heat sink (at bottom version) can not be achieved, and as solder may
stick to the heat sink (on top version).
3. If wave soldering is considered, then the package must be placed at a 45° angle to the solder wave direction. The package footprint must incorporate solder
thieves downstream and at the side corners.
4. Wave soldering is only suitable for LQFP, TQFP and QFP packages with a pitch (e) equal to or larger than 0.8mm; it is definitely not suitable for packages with a
pitch (e) equal or smaller than 0.65mm.
5. Wave soldering is only suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65mm; it is definitely not suitable for packages with a
pitch (e) equal to or smaller than 0.5mm.
11.0 Revision History
Table 14: Revision History
Revision
Date
1.0
24 May 2006
1.1
9 August 2006
1.6
18 January 2007
Format
Preliminary
Preliminary
Preliminary
Description
Initial document
Major update according AMIS40615
ƒ major update according AMIS40616
ƒ version numbering aligned with AMIS40615
AMI Semiconductor – January 2007, M-20545-001
16
www.amis.com