PI3041A Datasheet, PDF (12/18 Pages) AMI SEMICONDUCTOR – Contact Image Sensor 300DPI CIS Sensor Chip

Preliminary PI3041A datasheet
RED 660 LED Bar, A6 PCB In A6 Module Housing, At 5.0 MHz CLOCK
Parameters
Line scanning rate
Symbols
Typical
Tint ⁽¹⁾
251
Units
µs/line
Remarks
13 dies in the scan. see
note 1. (Bottom of Table 6)
Clock frequency
Output voltage
Fclk ⁽²⁾
5
Vpavg ⁽³⁾
0.5
MHz
V
Amplifier Gain = 1.0, see
note 3
Output voltage non-uniformity Up ⁽⁴⁾
± 20
%
LED bar non-uniformity,
Dark output voltage
Vd ⁽⁵⁾
<190
mV
see note 4.
Dark output non-uniformity
Ud ⁽⁶⁾
<80
mV
Adjacent Pixel non-uniformity Upadj ⁽⁷⁾
<20
%
LED Bar Input Voltage
VLED ⁽⁸⁾
5.0
V
LED Power Varies greatly.
LED Bar Input Current
ILED ⁽⁸⁾
90
See note 8.
mA
LED Power Varies greatly.
See note 8.
Table 4. Electro-Optical Characteristic At High Frequency
Y-G LED Bar, A6 PCB In A6 Module Housing, At 2.0 MHz CLOCK
Parameters
Symbols
Typical
Units
Remarks
Line scanning rate
Tint ⁽¹⁾
627
µs/line
13 dies in the scan. see
note 1. (Bottom of Table 6)
Clock frequency
Fclk ⁽²⁾
2
MHz
Output voltage
Vpavg ⁽³⁾
0.150
V
Amplifier Gain = 1.0, see
note 3
Output voltage non-uniformity Up ⁽⁴⁾
± 20
%
LED bar non-uniformity,
see note 4.
Dark output voltage
Vd ⁽⁵⁾
<30
mV
Dark output non-uniformity
Ud ⁽⁶⁾
<15
mV
Adjacent Pixel non-uniformity Upadj ⁽⁷⁾
<20
%
LED Bar Input Voltage
VLED ⁽⁸⁾
5.0
V
LED Power Varies greatly.
See note 8.
LED Bar Input Current
ILED ⁽⁸⁾
380
mA
LED Power Varies greatly.
See note 8.
Table 5. Electro-Optical Characteristic At High Frequency
Y-G LED Bar, A6 PCB In A6 Module Housing, At 5.0 MHz CLOCK
Parameters
Symbols
Typical
Units
Remarks
Line scanning rate
Tint ⁽¹⁾
251
µs/line
13 dies in the scan. see
note 1. (Bottom of Table 6)
Clock frequency
Fclk ⁽²⁾
5
MHz
Output voltage
Vpavg ⁽³⁾
0.080
V
Amplifier Gain = 1.0, see
note 3
Page 12 of 18 Date: 09/23/05