CS3160 Datasheet, PDF (5/11 Pages) Applied Micro Circuits Corporation – 2.5 Gbps Wide Bandwidth Transimpedance Amplifier

S3160 – 2.5 Gbps Wide Bandwidth Transimpedance Amplifier ^{Revision A – August 12, 2004}
Data Sheet
Table 2. Recommended Operating Conditions
Parameter
Ambient Temperature, T_A
Junction Operating Temperature, T_J
Voltage on V_CC with respect to GND
Min
Typ
Max
Units
-40
+85
°C
-20
+105
°C
3.135
3.3
3.465
V
Table 3. Absolute Maximum Ratings
The following are the absolute maximum stress ratings for the S3160. Stresses beyond those listed may cause permanent damage to the
device. Absolute maximum ratings are stress ratings only and operation of the device at the maximums stated or any other conditions beyond
those indicated in the "Recommended Operating Conditions" of this document are not inferred. Exposure to absolute maximum rating condi-
tions for extended periods may affect device reliability.
Parameter
Min
Typ
Max
Units
Voltage on V_CC with respect to GND
-0.5
4
V
Voltage on all Other Pads
-0.5
V_CC +0.3
V
Storage Temperature Range
-55
150
°C
Electrostatic Discharge (ESD) Sensitivity Rating - Human Body Model (HBM):
The S3160 is rated to the following ESD voltages based upon JEDEC standard: JESD22-A114-B
CLASS 0 - All pins are rated at or above 1000 volts except pins I_IN, OUTP and OUTN. OUTP and OUTN are rated at 500 V and I_IN is rated
to 100 volts.
Adherence to standards for ESD protection should be taken during the handling of the devices to ensure that the devices are not dam-
aged. The standards to be used are defined in ANSI standard ANSI/ESD S20.20-1999, "Protection of Electrical and Electronic Parts,
Assemblies and Equipment." Contact your local FAE or sales representative for applicable ESD application notes.
AMCC Confidential and Proprietary
5