CS3160 Datasheet, PDF (3/11 Pages) Applied Micro Circuits Corporation – 2.5 Gbps Wide Bandwidth Transimpedance Amplifier

S3160 – 2.5 Gbps Wide Bandwidth Transimpedance Amplifier ^{Revision A – August 12, 2004}
Data Sheet
Table 1. S3160 Pad Assignment and Description
Pin Name
I/O Pad # Coordinates [X,Y] ⁽¹⁾
Description
VCC
S
8
9
10
11
12
[868.9, 1051.4]
[669.6, 1051.4]
[470.8, 1051.4]
[271.8, 1051.4]
[90.8, 892.5]
+3.3 V Power supply.
GND
S
1
2
3
4
[273, 91.4]
[472, 91.4]
[670.8, 91.4]
[870.1, 91.4]
Ground.
RBYPASS
I
13
15
[100.925, 702.425]
[90.9, 293.3]
Bypass connection for cathode of photodiode.
IIN
I
14
[97.575, 473.975]
PIN diode input.
FILT
I
7
[1052.3. 777]
Filter capacitor input. A capacitor to ground can be
added at this pad to reduce the low frequency -3 dB
cutoff. (See Design Procedures).
OUTN
O
6
[1049.275, 567.475]
Negative transimpedance amplifier output.
OUTP
O
5
[1049.275, 375.225]
Positive transimpedance amplifier output.
1. The coordinates represent the position of the center of the pad in µm, with respect to the lower left corner of the circuit die.
2. Note: I = Input pin, O = Output pin, S = Supply pin.
AMCC Confidential and Proprietary
3