800EP-MTS44 Datasheet, PDF (4/7 Pages) Allen-Bradley – Push Buttons

Emergency Stop Devices
Push Buttons
800 E-Stops !
Specifications—30.5mm
Electrical Ratings
Dielectric strength
2200V for one minute
Electrical design life cycles 1,000,000 at max. rated load
Mechanical Ratings
Vibration
10 to 2000Hz 1.52mm displacement
(peak-to-peak) max./10g max. (except
Shock
Logic Reed)
1/2 cycle sine wave for 11ms ≥25g
(contact fragility) and no damage at 100g
Degree of protection
Type 1, 4, 4X, 12, 13; watertight/oiltight
IEC 529 IP66/65
Mechanical design life
cycles
250,000 min.
(Push-pull/twist-to-release)
Contact operation
Shallow, mini, and low voltage contact
blocks: Slow, double make and break.
Typical operating forces 7.5lbs max. push or pull
2-position push-pull
Environment
Temperature range
Operating➋
-40°C to +55°C (-40°F to +131°F)
Storage
-40°C to +85°C (-40°F to +185°F)
Standard Contact Ratings
Maximum thermal continuous current I_th 10A AC/2.5A DC.
Bulletin 800T units with 800T-XA contacts have ratings as follows:
Max.
Opertnl.
Volts Ue
Utilization
Category
Rated Operational Currents
IEC NEMA Volts Ue Make
Break
120 to 600 7200VA 720VA
AC 600 AC-15 A600 72 to 120 60A
720VA
24 to 72
60A
10A
28 to 600
DC 600 DC-13 Q600 _{24 to 28 ➌}
69VA
2.5A
! Performance Data: see publication A113, page Important-2.
➋ Operating temperatures below freezing are based on the absence of moisture
and liquids.
➌ For applications below 24V/24mA, PenTUFF contacts are recommended.
6-17