AK4185-A Datasheet, PDF (9/18 Pages) Asahi Kasei Microsystems – Evaluation board

[AKD4185-A]
Control Software Manual
Set-up of evaluation board and control software
1. Set up the AKD4185 board.
2. Connect IBM-AT compatible PC with AKD4185 by 10-line type flat cable (packed with AKD4185). Take care of
the direction of 10pin header. (Please install the driver in the CD-ROM when this control software is used on
Windows 2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device control software”.
In case of Windows95/98/ME, this installation is not needed. This control software does not operate on Windows
NT.)
3. Insert the CD-ROM labeled “AK4185 Evaluation Kit” into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon of “akd4185.exe” to set up the control program.
5. Then evaluate according to the follows.
Explanation of main window
When runs the control program, the window as shown in Figure 5 opens.
<KM090700>
Figure 5. Control Soft window
-9-
2007/11