AKD4528 Datasheet, PDF (8/38 Pages) Asahi Kasei Microsystems – EVALUATION BOARD FOR AK4528 REV.C

ASAHI KASEI
AK4353 Control Program operation manual
1. Connect IBM-AT compatible PC with Eva-board by 10-line type flat cable (packed with Eva-board).
Take care of the direction of 10pin Header (Refer to manual of Eva-board).
2. Start up “WINDOWS 95” or “WINDOWS 98”.
3. Insert the floppy disk packed with Eva-board into the floppy-disk drive.
4. Set up “MS-DOS” from start menu.
5. Change directory to the floppy-disk drive (ex.a:) at MS-DOS prompt.
6. Type “4353”.
7. Then follow the displayed comment (See the following).
[AKD4528]
==================== <<Operating flow>> =====================
Write data/ Display register map/ Reset etc.à loop
=========================================================
<KM063100>
-8-
’00/06