AKD4528 Datasheet, PDF (6/38 Pages) Asahi Kasei Microsystems – EVALUATION BOARD FOR AK4528 REV.C

ASAHI KASEI
[AKD4528]
2. Control Software Manual
n Set-up of evaluation board and control software
1. Set up the AKD4528 according to previous term.
2. Connect IBM-AT compatible PC with AKD4528 by 10-line type flat cable (packed with AKD4528). Take care of
the direction of 10pin header. (This control software does not operate on Windows NT, therefore please operate it on
Windows95/98.)
3. Insert the floppy disk labeled “AKD4528 Control Program ver 1.0” into the floppy-disk drive.
4. Access the floppy-disk drive and double-click the icon of “akd4528.exe” to set up the control program.
5. Then please evaluate according to the follows.
n Explanation of each buttons
1. [Port Setup]: set up the printer port.
2. [Write default]: initialize the register of AK4528.
3. [Function1]: set up the dialog, which can be written by keyboard operation.
4. [Function2]: set up the dialog, which can be written by keyboard operation.
5. [Write]:
set up the dialog corresponding to each register, which can be written by mouse operation.
n Explanation of each dialog
1. [Function1 Dialog]: Dialog to write data by keyboard operation
Address Box: Input registers address in 2 figures of hexadecimal.
Data Box:
Input registers data in 2 figures of hexadecimal.
If you want to write the input data to AK4528, click “OK” button. If not, click “Cancel” button.
<KM063100>
-6-
’00/06