AK4438 Datasheet, PDF (7/63 Pages) Asahi Kasei Microsystems – 108dB 768kHz 32bit 8-Channel Audio DAC

[AK4438]
6. Absolute Maximum Ratings
(VSS1=VSS2=0V; Note 2)
Parameter
Symbol
Min.
Max.
Unit
Power Supplies
Analog
AVDD
-0.3
4.3
V
Digital
TVDD
-0.3
4.3
V
Difference (VSS1 ~ 2)
ΔGND
-0.3
0.3
V
Input Current (any pins except for supplies)
IIN
-
10
mA
Digital Input Voltage
VIND
-0.3
TVDD+0.3
V
Ambient Temperature (power applied)
Ta
-40
105
C
Storage Temperature
Tstg
-65
150
C
Note 2. All voltages with respect to ground. VSS1 and VSS2 must be connected to the same analog
ground plane.
Note 3. The maximum Digital input voltage is smaller value between (LVDD+0.3)V and 4.3V.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
7. Recommended Operation Conditions
(VSS1=VSS2=0V; Note 2)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Power Supplies
Analog
Digital
AVDD
3.0
3.3
3.6
V
TVDD
1.7
3.3
3.6
V
Voltage Reference “H” voltage reference VREFH AVDD0.5
-
AVDD
V
(Note 5)
“L” voltage reference VREFL
-
VSS2
-
V
Note 4. The power up sequence between AVDD and TVDD is not critical.
Note 5. The VREFL pin must be connected to VSS2.
Note 6. Do not turn off the power supply of the AK4438 with the power supply of the peripheral device
turned on. When using the I²C interface, pull-up resistors of SDA and SCL pins should be
connected to TVDD or less voltage.
* AKM assumes no responsibility for the usage beyond the conditions in this data sheet.
016001925-E-00
-7-
2016/03