AK5536 Datasheet, PDF (6/69 Pages) Asahi Kasei Microsystems – 6-Channel Differential 32-bit  ADC

[AK5536]
No. Pin Name
TDMIN
35
DSDOR1
36
SDTO1
DSDOL2
37
SDTO2
DSDOR2
38
SDTO3
DSDOL3
39 DSDOR3
40 TESTO1
41 TESTO2
42 OVF
CKS0
43 SDA
CDTI
CKS1
44 CAD0_I2C
CSN
CKS2
45 SCL
CCLK
46
CKS3
CAD1
47
SLOW
DCKB
48
SD
PMOD
49 ^DIF0
DSDSEL0
50 ^DIF1
DSDSEL1
51 TDM0
52 TDM1
53 ^PSN
CAD0_SPI
54 I2C
55 DP
I/O
Function
I
TDM Data Input Pin in PCM Mode
This pin is pulled down by 100 kΩ internally
O
Audio Serial Data Output Pin for AIN2 in DSD Mode
This pin is pulled down by 100 kΩ internally
O Audio Serial Data Output Pin for AIN1 and AIN2 in PCM Mode
O Audio Serial Data Output Pin for AIN3 in DSD Mode
O Audio Serial Data Output Pin for AIN3 and AIN4 in PCM Mode
O Audio Serial Data Output Pin for AIN4 in DSD Mode
O Audio Serial Data Output Pin for AIN5 and AIN6 in PCM Mode
O Audio Serial Data Output Pin for AIN5 in DSD Mode
O Audio Serial Data Output Pin for AIN6 in DSD Mode
O Test Output Pin1
O Test Output Pin2
O Analog Input Over Flow Flag Output Pin
I Clock Mode Select Pin
I/O Control Data I/O Pin in I²C Bus Serial Control Mode
I Control Data Input Pin in 3-wire Serial Control Mode
I Clock Mode Select Pin
I Chip Address 0 Pin in I²C Bus Serial Control Mode
I Chip Select Pin in 3-wire Serial Control Mode
I Clock Mode Select Pin
I Control Data Clock Pin in I²C Bus Serial Control Mode
I Control Data Clock Pin in 3-wire Serial Control Mode
I Clock Mode Select Pin
I Chip Address 1 Pin in I²C Bus or 3-wire Serial Control Mode
I Slow Roll-OFF Digital Filter Select Pin in PCM Mode
I Polarity of DCLK Pin in DSD Mode
I Short Delay Digital Filter Select Pin in PCM Mode
I DSD Phase Modulation Mode Select Pin in DSD Mode
I
Audio Data Format Select Pin in PCM Mode
“L”: MSB justified, “H”: I²S
I DSD Sampling Rate Control Pin in DSD Mode
I
Audio Data Format Select Pin in PCM Mode
“L”: 24-bit Mode, “H”: 32-bit Mode
I DSD Sampling Rate Control Pin in DSD Mode
I
TDM I/F Format Select Pin
* This pin must be fixed to “L” when using DSD mode.
I
TDM I/F Format Select Pin
* This pin must be fixed to “L” when using DSD mode.
I
Control Mode Select Pin (I2C pin = “H”)
“L”:I²C Bus Serial Control Mode, “H” :Parallel Control Mode
I Chip Address 0 Pin in 3-wire Serial Control Mode (I2C pin = “L”)
Control Mode Select Pin
I “L”: 3-wire Serial Control Mode
“H”: I²C Bus Serial Control Mode or Parallel Control Mode
I
DSD Mode Enable Pin
“L”: PCM Mode, “H”: DSD Mode
Power Down
Status
-
Hi-z
L
L
L
L
L
L
L
Hi-Z
Hi-Z
L
-
Hi-z
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
015099885-E-00
-6-
2016/03