AK4421A Datasheet, PDF (6/19 Pages) Asahi Kasei Microsystems – 192kHz 24-Bit Stereo ΔΣ DAC with 2Vrms Output

[AK4421A]
FILTER CHARACTERISTICS
(Ta = 25°C; VDD=CVDD = +3.0 ∼ +3.6V; fs = 44.1 kHz)
Parameter
Symbol
min
typ
max
Units
Digital filter
Passband
±0.05dB (Note 12)
PB
0
20.0
kHz
–6.0dB
-
22.05
-
kHz
Stopband (Note 12)
SB
24.1
-
-
kHz
Passband Ripple
PR
-
-
± 0.02
dB
Stopband Attenuation
SA
54
-
-
dB
Group Delay (Note 13)
GD
-
19.3
-
1/fs
Digital Filter + LPF
Frequency Response
fs=44.1kHz, 20.0kHz
fs=96kHz, 40.0kHz
fs=192kHz, 80.0kHz
FR
-
± 0.05
-
dB
FR
-
± 0.05
-
dB
FR
-
± 0.05
-
dB
Note 12. The passband and stopband frequencies scale with fs (system sampling rate).
For example, PB=0.4535×fs (@±0.05dB), SB=0.546×fs.
Note 13. Calculated delay time caused by the digital filter. This time is measured from setting the 16/24bit data
of both channels to input register to the output of the analog signal.
DC CHARACTERISTICS
(Ta = 25°C; VDD=CVDD = +3.0 ∼ +3.6V)
Parameter
Symbol
min
typ
max Units
High-Level Input Voltage
VIH 70%VDD
-
-
V
Low-Level Input Voltage
VIL
-
-
30%VDD V
High-Level Output Voltage (Iout = -80uA)
VOH VDD-0.4
-
-
V
Low-Level Output Voltage (Iout = 80uA)
VOL
-
-
0.4
V
Input Leakage Current (Note 14)
Iin
-
-
± 10
μA
Note 14. The SMUTE and DIF pins are not included. The SMUTE pin has an internal pull-down resistor (typ.100kΩ).
The DIF pin has an internal pull-up resistor (typ.100kΩ).
MS1086-E-01
-6-
2009/09