AK4103A_09 Datasheet, PDF (5/27 Pages) Asahi Kasei Microsystems – 192kHz 24-Bit DIT

[AK4103A]
ABSOLUTE MAXIMUM RATINGS
(VSS=0V; Note 3)
Parameter
Symbol
min
Power Supply
VDD
-0.3
Input Current (All pins except supply pins)
IIN
-
Input Voltage
VIND
-0.3
Ambient Operating Temperature
Ta
-40
Storage Temperature
Tstg
-65
max
6.0
±10
VDD+0.3
85
150
Note 3. All voltages with respect to ground.
WARNING: Operation at or beyond these limits may results in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
Units
V
mA
V
°C
°C
(VSS=0V; Note 3)
Parameter
Power Supply
RECOMMENDED OPERATING CONDITIONS
Symbol
min
typ
VDD
4.75
5.0
*AKEMD assumes no responsibility for the usage beyond the conditions in this datasheet.
max
Units
5.25
V
DC CHARACTERISTICS
(Ta=25°C; VDD=4.75~5.25V)
Parameter
Symbol
min
typ
Power Supply Current (fs=108kHz, Note 4)
IDD
6
High-Level Input Voltage
VIH
2.4
-
Low-Level Input Voltage
VIL
-
-
High-Level Output Voltage
(Except TXP/N pins: Iout=-400µA)
VOH VDD-1.0
-
(TXP/N pins:
Iout= -8mA)
VOH VDD-0.8
-
Low-Level Output Voltage
(Except TXP/N pins: Iout= 400µA)
VOL
-
-
(TXP/N pins:
Iout= 8mA)
VOL
-
-
Input Leakage Current
Iin
-
-
max Units
15
mA
-
V
0.8
V
-
V
-
V
0.4
V
0.6
V
±10
μA
Note 4. Power supply current (IDD) is 3mA(typ)@fs=48kHz and 9mA(typ)@fs=192kHz.
IDD increases by 20mA(typ) with professional output driver circuit.
IDD is 350μA(typ) if PDN pin = “L”, TRANS pin = “H” and all other input pins except internal pull-up/pull-
down pins are held to VSS.
MS0251-E-01
-5-
2009/01