AKD4710-A Datasheet, PDF (4/30 Pages) Asahi Kasei Microsystems – AK4710 Evaluation Board Rev.1

ASAHI KASEI
[AKD4710-A]
Control Soft Manual
■ Evaluation Board and Control Soft Settings
1. Set an evaluation board properly.
2. Connect Evaluation board to PC with USB cable.
USB control is recognized as HID (Human Interface Device) on the PC.
When it can not be recognized correctly please reconnect Evaluation board to PC with USB cable.
3. Proceed evaluation by following the process below.
[Support OS]
Windows 2000 / XP
64bit OS’s are not supported.
Windows 95 / 98 / Me / NT are not supported.
■ Operation Screen
1. Start up the control program following the process above.
2. After the evaluation board’s power is supplied, the AK4710 must be reset once bring S1 (AK4710-PDN) “L” to “H”.
3. The operation screen is shown below
<KM105902>
-4-
2011/06