|
AKD4527B Datasheet, PDF (31/40 Pages) Asahi Kasei Microsystems – EVALUATION BOARD REV.D FOR AK4527B | |||
|
◁ |
ASAHI KASEI
[AK4112A Control Program]
AK4112A Control Program operation manual
1. Connect IBM-AT compatible PC with Eva-board by 10-line type flat cable (packed with Eva-board).
Take care of the direction of 10pin Header (Refer to manual of Eva-board).
2. Start up âWINDOWS 95â or âWINDOWS 98â.
3. Insert the floppy-disk packed with Eva-board into the floppy-disk drive.
4. Set up âMS-DOSâ from start menu.
5. Change directory to the floppy-disk drive(ex.a:) at MS-DOS prompt.
6. Type â4112â.
7. Then follow the displayed comment (See the following).
==================== <<Operating flow>> =====================
Write data/ Display register map/ Reset etc.Ã loop
=========================================================
â00/2
-1-
|
▷ |