|
AKD4382 Datasheet, PDF (20/26 Pages) Asahi Kasei Microsystems – EVALUATION BOARD REV.A FOR AK4382 | |||
|
◁ |
ASAHI KASEI
[AKD4382 Control Program]
2. [Function2 Dialog] : Dialog to evaluate DATT
This dialog corresponds to only addr=03H and 04H
Address Box: Input register address in 2 figures of hexadecimal.
Start Data Box: Input start data in 2 figures of hexadecimal.
End Data Box: Input end data in 2 figures of hexadecimal.
Interval Box:
Data is written to AK4382 by this interval.
Step Box:
Data changes by this step.
Mode Select Box:
If you check this check box, data reaches end data, and returns to start data.
[Example] Start Data = 00, End Data = 09
Data flow: 00 01 02 03 04 05 06 07 08 09 09 08 07 06 05 04 03 02 01 00
If you do not check this check box, data reaches end data, but does not return to start data.
[Example] Start Data = 00, End Data = 09
Data flow: 00 01 02 03 04 05 06 07 08 09
If you want to write the input data to AK4382, click âOKâ button. If not, click âCancelâ button.
3. [Write Dialog] : Dialog to write data by mouse operation
There are dialogs corresponding to each register.
Click the âWriteâ button corresponding to each register to set up the dialog. If you check the check box, data
becomes âHâ or â1â. If not, âLâ or â0â.
If you want to write the input data to AK4382, click âOKâ button. If not, click âCancelâ button.
n Operation flow
Keep the following flow surely.
1. Set up the control program according to explanation above.
2. Click âPort Setupâ button.
3. Click âWrite defaultâ button.
4. Then set up the dialog and input data.
n Indication of data
Input data is indicated on the register map. Red letter indicates âHâ or â1â and blue one indicates âLâ or â0â. Blank is
the part that is not defined in the datasheet.
n Attention on the operation
If you set up Function1 or Function2 dialog, input data to all boxes. Attention dialog is indicated if you input data or
address that is not specified in the datasheet or you click âOKâ button before you input data. In that case set up the
dialog and input data once more again. These operation does not need if you click âCancelâ button or check the check
box.
â00/4
|
▷ |