AKD4620B Datasheet, PDF (2/60 Pages) Asahi Kasei Microsystems – Evaluation board AK4620B

ASAHI KASEI
Evaluation Board Manual
„ Operation sequence
1) Set up the power supply line
[+15V] (green)
= +15V
[-15V] (blue)
= -15V
[GND] (black)
= 0V
Note: Each supply line should be distributed from the power supply unit.
2) Set up the evaluation modes, jumper pins and DIP switch. (See the followings.)
3) Power on
The AK4620B should be reset once bringing SW2 (PDN) “L” upon power-up.
[AKD4620B-B]
<KM078900>
-2-
2005/05