AKD4620B Datasheet, PDF (12/60 Pages) Asahi Kasei Microsystems – Evaluation board AK4620B

ASAHI KASEI
[AKD4620B-B]
Control Software Manual
„ Set-up of evaluation board and control software
1. Set up the AKD4620B-B according to previous term.
2. Connect IBM-AT compatible PC with AKD4620B-B by 10-line type flat cable (packed with AKD4620B-B). Take
care of the direction of 10pin header. (Please install the driver in the CD-ROM when this control software is used on
Windows 2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device control software”.
In case of Windows95/98/ME, this installation is not needed. This control software does not operate on Windows
NT.)
3. Insert the CD-ROM labeled “AKD4620B-B Evaluation Kit” into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon of “akd4620B-b0.exe” to set up the control program.
5. Then please evaluate according to the follows.
„ Operation flow
Keep the following flow.
1. Set up the control program according to explanation above.
2. Click “Write default” button.
3. Then set up the dialog and input data.
„ Explanation of each buttons
1. [Port Setup] :
2. [Write default] :
3. [All Write] :
4. [Function1] :
5. [Function2] :
6. [F3] :
7. [SAVE] :
8. [OPEN] :
9. [Write] :
Set up the printer port.
Initialize the register of AK4620B.
Write all registers that is currently displayed.
Dialog to write data by keyboard operation.
Dialog to evaluate IPGA and ATTL/ATTR.
Dialog of sequential writing.
Save the current register setting.
Write the saved values to all register.
Dialog to write data by mouse operation.
<KM078900>
- 12 -
2005/05