AKD4384-SC Datasheet, PDF (2/32 Pages) Asahi Kasei Microsystems – 192kHz sampling 24Bit ΔΣ DAC

[AKD4384-SC]
Operation sequence
1) Set up the power supply lines. (See “Other jumpers set-up”.)
Name
+15V
-15V
AGND
Color
Red
Blue
Black
Voltage
+12∼+15V
-12∼-15V
0V
Comments
Attention
For regulator and op-amps.
For op-amps.
GND
This jack should be always connected to power
supply.
This jack should be always connected to power
supply.
This jack should be always connected to power
supply.
Table 1. Set up of power supply lines
Each supply line should be distributed from the power supply unit.
2) Set-up the jumper pins
3) Set-up the DIP switches. (See the followings.)
4) Power on
The AK4384 should be reset once by bringing SW1 (PDN) “L” upon power-up.
<KM079003>
2
2007/06