|
AK4356 Datasheet, PDF (19/29 Pages) Asahi Kasei Microsystems – 192kHz 24 Bit IX-CHANNEL DAC FOR DVD-AUDIO | |||
|
◁ |
ASAHI KASEI
[AK4356]
n Reset Function
When RSTN=0, all DACs are powered down but the internal register values are not initialized. The analog outputs go to
VCOM voltage and DZF pins of all channels go to âHâ. Figure 7 shows the sequence of reset by RSTN bit.
RSTN bit
Internal
RSTN bit
2~3/fs (6)
Internal
State
D/A In
(Digital)
D/A Out
(Analog)
Clock In
MCLK,LRCK,BICK
DZFL/DZFR
Normal Operation
(1)
GD
Digital Block Power-down
Normal Operation
â0â data
(3) (2)
(3)
(4)
Donât care
2/fs(5)
GD (1)
Notes:
(1) The analog output corresponding to digital input has the group delay (GD).
(2) Analog outputs go to VCOM voltage.
(3) Click noise occurs at the edges(â ¯â) of the internal timing of RSTN bit. This noise is output even if â0â data is
input.
(4) The external clocks (MCLK, BICK and LRCK) can be stopped in the reset mode (RSTN = âLâ).
(5) DZF pins go to âHâ when the RSTN bit becomes â0â, and go to âLâ at 4~5/fs after RSTN bit becomes â1â.
(6) There is a delay, 2~3/fs from RSTN bit â1â to the internal RSTN â1â.
Figure 7. Reset sequence example
M0072-E-01
- 19 -
1999/09
|
▷ |