AK4340_06 Datasheet, PDF (18/23 Pages) Asahi Kasei Microsystems – 192kHz 24-Bit Stereo ΔΣ DAC with 2Vrms Output

ASAHI KASEI
[AK4340]
„ Register Definitions
Addr Register Name
D7
D6
00H Control 1
ACKS
0
default
1
0
D5
D4
D3
D2
D1
D0
0
DIF2
DIF1 DIF0
PW
RSTN
0
0
1
0
1
1
RSTN: Internal timing reset control
0: Reset. All registers are not initialized.
1: Normal Operation
When MCLK frequency or DFS changes, the click noise can be reduced by RSTN bit.
PW: Power down control
0: Power down. All registers are not initialized.
1: Normal Operation
DIF2-0: Audio data interface formats (see Table 5)
Initial: “010”, Mode 2
ACKS: Master Clock Frequency Auto Setting Mode Enable
0: Disable, Manual Setting Mode
1: Enable, Auto Setting Mode
Master clock frequency is detected automatically at ACKS bit “1”. In this case, the settings of DFS1-0
are ignored. When this bit is “0”, DFS1-0 set the sampling speed mode.
Addr Register Name
D7
01H Control 2
0
default
0
D6
D5
D4
D3
D2
D1
D0
0
0
DFS1 DFS0 DEM1 DEM0 SMUTE
0
0
0
0
0
1
0
SMUTE: Soft Mute Enable
0: Normal operation
1: DAC outputs soft-muted
DEM1-0: De-emphasis Response (see Table 7)
Initial: “01”, OFF
DFS1-0: Sampling speed control
00: Normal Speed Mode
01: Double Speed Mode
10: Quad Speed Mode
When changing between Normal/Double Speed Mode and Quad Speed Mode, some click noise
occurs.
MS0501-E-00
- 18 -
2006/04