|
AKD7780 Datasheet, PDF (13/48 Pages) Asahi Kasei Microsystems – 24-bit stereo ADC’s, a mono ADC and a stereo SRC. | |||
|
◁ |
[AKD7780]
Control Software Manual
 Set-up of the evaluation board and control software
1. Set up the AKD7780 according to previous term.
2. Connect IBM-AT compatible PC with AKD7780 by 25 pin printer cable (packed with AKD7780). (Please install the
driver in the CD-ROM when software is used on Window 2000/XP. Please refer âInstallation Manual of Control
Software Driver by AKM device control softwareâ. In case of Windows95/98/ME, this installation is not needed.
This control software does not operate on Windows NT. And the operation on Windows Vista has not been
confirmed.)
3. Insert the CD-ROM labeled âAK7780 Evaluation Kitâ into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon of âAK7780.exeâ to set up the program.
5. Then please evaluate according to the follows.
 Operation flow
Keep the following flow
1. Set up the control program according to the explanation above.
2. Click âBoard Initâ button to initialize the board.
3. Select the needed dialogue to evaluate by changing the setting.
<KM090600>
Figure 10. The image of control software
- 13 -
2007/09
|
▷ |