AKD5700-A Datasheet, PDF (11/39 Pages) Asahi Kasei Microsystems – digital audio 16bit A/D converter

ASAHI KASEI
[AKD5700-A]
„ Other jumper pins set up
1. JP1 (GND)
OPEN
SHORT
: Analog ground and Digital ground
: Separated.
: Common. (The connector “DGND” should be open.) <Default>
2. JP2 (AVDD_SEL) : AVDD of the AK5700
OPEN
: AVDD is supplied from the regulator (“AVDD” jack should be open). < Default >
SHORT : AVDD is supplied from “AVDD ” jack.
3. JP3 (DVDD_SEL) : DVDD of the AK5700
AVDD
: DVDD is supplied from “AVDD”. < Default >
DVDD
: DVDD is supplied from “DVDD ” jack.
4. JP4 (CSP)
H
L
: CSP signal Select (Hi or Low)
: CSP= “Hi”
: CSP= “Low”< Default >
5. JP5, JP6 (MPWR) : Connect to MPWR
OPEN
: No connect< Default >
SHORT : Connect
6. JP7 (LVC_SEL) : Supply line selection of Logic block of LVC.
DVDD
: Logic block of LVC is supplied from “DVDD”. < Default >
VD
: Logic block of LVC is supplied from “VD ” jack.
7. JP20 (SDTO)
OPEN
SHORT
: Select #4 pin of the PORT4 (DSP)
: Input data for EXSDTI<Default>
: Output data for SDTO of the PORT4
8. JP8 (CCLK)
OPEN
SHORT
: CCLK select
: No connect
: CCLK connect <Default>
<KM087000>
- 11 -
2006 / 12