AKD4589 Datasheet, PDF (10/51 Pages) Asahi Kasei Microsystems – AK4589 Evaluation Board Rev.2

ASAHI KASEI
[AKD4589-B]
„ Explanation of each dialog
1. [Function1 Dialog]: Dialog to write data by keyboard operation
Address Input Box : Input address of register which data should be written into,in 2 figures of hexadecimal.
Data Input Box : Input data which should be written into the register,in 2 figures of hexadecimal.
Click “OK” button,if you write input data into register.
Click “Cancel” button,if you don’t write input data into register.
2. [Write Dialog]: Dialog to write data by mouse operation
There are dialogs corresponding to each register.
Click the “Write” button corresponding to each register to set up the dialog.
If you check the check box, data becomes “H” or “1”. If not, “L” or “0”.
Click “OK” button,if you write input data into register.
Click “Cancel” button,if you don’t write input data into register.
„ Indication of data
Input data is indicated on the register map.
Red letter indicates “H” or “1” and blue letter indicates “L” or “0”.
Blank is the part that is not defined in the datasheet.
„ Attention on the operation
Input data to all boxes when you have set up “Function1 dialog”. An “attention dialog” is indicated if you input data or
address that is not specified in the datasheet or you click “OK” button before you input data. In that case set up the dialog
and input data once more again. These operations does not need if you click “Cancel” button or check the check box.
<KM076201>
- 10 -
2005/07