AKD4364 Datasheet, PDF (1/30 Pages) Asahi Kasei Microsystems – EVALUATION BOARD REV.A FOR AK4364

ASAHI KASEI
[AKD4364]
AKD4364
Evaluation board Rev.A for AK4364
GENERAL DESCRIPTION
The AKD4364 is an evaluation board for AK4364, 96kHz 24bit D/A converter with PLL & DIT. The
AKD4364 has a digital interface with AKM’s wave generator using ROM data and AKM’s A/D converter
evaluation boards. Therefore, it is easy to evaluate the AK4364.
n Ordering guide
AKD4364 --- Evaluation board for AK4364
(Cable for connecting with printer port of IBM-AT compatible PC
and control software are packed with this.)
FUNCTION
• On-board clock generator
• Compatible with 2 types of interface
- Direct interface with AKM’s A/D converter evaluation boards
and direct interface with AKM’s signal generator(AKD43XX) by 10pin header
- On-board CS8414 as DIR which accepts optical input
• BNC connector for external clock input
• 10pin header for serial control interface
• On-board mute circuit for analog output
• Optical output for TX output
Opt Out
2.7∼5.5V GND
Opt In
CS8414
(DIR)
DZF
Mute
ROM
or A/D
AK4364
Lch
10pin Header
External
Clock
Divider
MCKO
MCKI
Rch
Clock
Generator
10pin Header
Control
Figure 1. AKD4364 Block Diagram
* Circuit diagram and PCB layout are attached at the end of this manual.
<KM061301>
-1-
’00/4