APT26GU30B Datasheet, PDF (2/6 Pages) Advanced Power Technology – POWER MOS 7 IGBT

DYNAMIC CHARACTERISTICS
APT26GU30B
Symbol Characteristic
Test Conditions
MIN TYP MAX UNIT
C_ies Input Capacitance
Capacitance
1200
C_oes Output Capacitance
V_GE = 0V, V_CE = 25V
120
pF
C_res Reverse Transfer Capacitance
f = 1 MHz
6
V_GEP Gate-to-Emitter Plateau Voltage
Gate Charge
7.0
V
Q_g
Total Gate Charge ³
Q_ge Gate-Emitter Charge
Q_gc Gate-Collector ("Miller ") Charge
V_GE = 15V
V_CE = 150V
I_C = 13A
37
8
nC
10
SSOA Switching Safe Operating Area
T_J = 150°C, R_G = 5Ω, V_GE = 85
A
15V, L = 100µH,V_CE = 300V
t_d(on) Turn-on Delay Time
Inductive Switching (25°C)
11
t_r
t_d(off)
t_f
E_on1
E_on2
Current Rise Time
Turn-off Delay Time
Current Fall Time
Turn-on Switching Energy ⁴
Turn-on Switching Energy (Diode) ⁵
V_CC = 200V
V_GE = 15V
I_C = 13A
R_G = 20Ω
T_J = +25°C
14
ns
60
55
TBD
48
µJ
E_off Turn-off Switching Energy ⁶
60
t_d(on) Turn-on Delay Time
Inductive Switching (125°C)
11
t_r
t_d(off)
t_f
E_on1
E_on2
Current Rise Time
Turn-off Delay Time
Current Fall Time
Turn-on Switching Energy ⁴
Turn-on Switching Energy (Diode) ⁵
V_CC = 200V
V_GE = 15V
I_C = 13A
R_G = 20Ω
T_J = +125°C
14
ns
70
100
TBD
80
µJ
E_{off Turn-off Switching Energy} ⁶
95
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol Characteristic
MIN TYP MAX UNIT
R_ΘJC
R_ΘJC
W_T
Junction to Case (IGBT)
Junction to Case (DIODE)
Package Weight
0.67
°C/W
N/A
5.9
gm
1 Repetitive Rating: Pulse width limited by maximum junction temperature.
2 For Combi devices, I_ces includes both IGBT and FRED leakages
3 See MIL-STD-750 Method 3471.
4 E_on1 is the clamped inductive turn-on-energy of the IGBT only, without the effect of a commutating diode reverse recovery current
adding to the IGBT turn-on loss. (See Figure 24.)
5 E_on2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching
loss. A Combi device is used for the clamping diode as shown in the E_on2 test circuit. (See Figures 21, 22.)
6 E_off is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.)
APT Reserves the right to change, without notice, the specifications and information contained herein.
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.