UG-223 Datasheet, PDF (9/20 Pages) Analog Devices – This user guide describes the EVAL-AD7193EBZ evaluation

Evaluation Board User Guide
FAST 50Hz QUICK TEST
From the AD719x Evaluation Board Software main window,
click the Fast 50Hz Quick Test button to configure the AD7193
to operate with the fast filter. When the Fast 50Hz Quick Test
button is clicked, the AD7193 is configured to operate with the
fast filter. The software configures the AD7193 to have a gain of
128, the sinc³ filter is selected with the first sinc filter notch at
800 Hz, and the averaging block is programmed to 16 to place a
notch at 50 Hz. Channel AIN1–AIN2 is selected and REFIN1 is
UG-223
selected as the reference source. The software also provides
instructions on the link positions for the AD7193 evaluation
board. When the instructions given on each window are
completed, click OK. The AD7193 gathers 100 samples, displays
the results in the waveform, and analyzes the data to calculate the
maximum conversion, minimum conversion, and average
conversion. The rms noise, peak-to-peak noise, and resolution
are also calculated.
Figure 9. Fast 50Hz Quick Test
Rev. 0 | Page 9 of 20