UG-223 Datasheet, PDF (5/20 Pages) Analog Devices – This user guide describes the EVAL-AD7193EBZ evaluation

Evaluation Board User Guide
UG-223
MAIN WINDOW
Figure 5. AD7193 Evaluation Software Main Window
User Units Setup
Menu Bar
File
This button allows the user to change the display units on the
graph and histogram.
Selecting File allows the user to write the current set of data to a
Sampling
file for later use, log data as it is gathered, and exit the program.
This button allows the user to sample continuously or to sample
Buttons
Delete Data/Clear Graphs
a specific number of samples. When the option Sampling:
Capture Defined Sample Set is selected, the sample size is
entered in the Samples text box.
This button allows the user to delete the data displayed in the graph.
ADC Reset
This button allows the user to reset the AD7193 to its default
(power on) settings.
ADC Setup
This button opens the ADC Setup window that allows the user
to configure the AD7193.
Start Sampling
This button allows the user to read samples from the AD7193.
Data
Display Units (V/mV/μV/nV)
This button allows the user to display the conversions in
hexadecimal, decimal, volts, or in user-specified units. If the
conversions are displayed in volts, the value of the reference voltage
Fast 50 Hz Quick Test
must be entered in the Vref text box.
This button allows the user to easily select the fast filtering
mode on the AD7193.
Low Noise Quick Test
Autoscale
This button allows the user to enable or disable the Autoscale
function on the waveform plot.
This button allows the user to access the noise testing software.
Rev. 0 | Page 5 of 20