UG-223 Datasheet, PDF (8/20 Pages) Analog Devices – This user guide describes the EVAL-AD7193EBZ evaluation

UG-223
Evaluation Board User Guide
Figure 7. ADC Setup Window
CONFIGURATION ASSIST TOOL
The AD7193 Evaluation Software can be used as a configuration
assist tool, even when an AD7193 evaluation board is not connected.
The configuration assist tool can be used by doing the following:
1. When the AD7193 Evaluation Software opens, click the
ADC Setup button.
2. The message in Figure 8 appears.
3. Click Ignore.
4. The ADC Setup window will then open. In the ADC Setup
window, the user can determine the values written to the
AD7193 on-chip registers for different configurations.
The Registers HEX values pane can be used. When the
values in this section are altered, the other sections of the
ADC Setup window are updated so that the user easily
sees the impact of the register changes. Alternatively, the
user can alter the Analog Inputs, Digital Filter, Voltage
Reference, Mode of Operation, Clock Configuration,
Digital Outputs, and Output Data Format panes. The
Registers HEX values pane is updated with changes;
therefore, the user can easily calculate the values written
to the AD7193 for different configurations.
Figure 8. Configuration Tool
Rev. 0 | Page 8 of 20