EVAL-ADM1022 Datasheet, PDF (9/14 Pages) Analog Devices – Evaluation Board for Microprocessor System Temperature Monitor

Alternatively, the entire contents of a register may be
changed by typing a Hex or Decimal value in the “Write”
text box. When the contents of the text box is altered, the
button alongside will change from green to red, signifying
a newly entered value. Clicking on the red button will
write the updated value to the selected register.
EVAL-ADM1022
VISUAL DISPLAY
The Visual Display tab allows all three temperature mea-
surement channels to be monitored and graphed.
EASY SETUP
At the bottom of the Visual Display Tab is the “Easy
Setup” button:-
This feature is useful where a register contains a numeric
value, such as a temperature limit.
Another useful portion of the form provides info about the
selected register; the address of the register, and the previ-
ous values read and written to/from the register.
If the ADM1022 has been configured for only one remote
thermal diode, then pressing “Easy Setup” will graph the
Internal Temperature and the Remote Diode temperature.
If the ADM1022 has been configured for both remote
thermal diode channels, then pressing the “Easy Setup”
button will graph the Internal Temperature and the two
Remote Diode temperature channels.
REV. B
Figure 4. Read/Write Program Tab
–9–