EVAL-ADM1022 Datasheet, PDF (8/14 Pages) Analog Devices – Evaluation Board for Microprocessor System Temperature Monitor

EVAL-ADM1022
Figure 3. Main Program Tab
READ/WRITE
This tab displays information about the ADM1022’s inter-
nal registers. It allows their contents to be read and/or
altered. Each register has a label associated with it printed
on the tab. Moving the mouse pointer over the label
changes the register label colour to light green. When the
register label is clicked, it becomes a highlighted yellow.
Now this register will become the default on-screen regis-
ter and the register label will turn dark green to indicate
this.
The contents of the selected register will be displayed in
the register contents box, along with the name of each
individual register bit. The register contents are also dis-
played in hexadecimal and decimal format.
Clicking on a register label will cause its contents to be
read once if continuous reading is off. If continuous read-
ing is on, the register contents will be displayed continu-
ously; allowing any register bit changes to be viewed
immediately.
When a register label is clicked, it performs a single read
of that register from the ADM1022. Therefore, continu-
ous reading will be off:-
If however, the user wishes to continuously monitor the
selected register, then this can be done by toggling the
continuous reading button to its on-state.
When a register label has been clicked, the Read/Write
portion of the form reflects each individual bit of the se-
lected register. Thus, any bit of the register may be modi-
fied or monitored in this box.
–8–
REV. B