EVAL-ADM1022 Datasheet, PDF (6/14 Pages) Analog Devices – Evaluation Board for Microprocessor System Temperature Monitor

EVAL-ADM1022
Click on “Next” to go on to the next screen, which allows
the user to select between connection of the evaluation
board via the printer port or to the SMBus using the
DIMM interface card.
The software will search for the ADM1022, and when it is
found, the following screen will appear. The device ad-
dress found will depend on the setting of Address Select
switch, SW2.
Once the communications medium has been selected,
click on “Next” to go to the next screen. When you are
ready for the software to begin searching for the evaluation
board on either the parallel port or the SMBus, click
“Next”.
If “Yes” is selected, then the following message appears.
If “No” is chosen, then the software will search for an-
other ADM1022 device at a different address. This feature
is useful if multiple ADM1022’s exist on the same SMBus
and you need access to one of the devices at a different
address.
–6–
REV. B