ADV7393_15 Datasheet, PDF (8/108 Pages) Analog Devices – Low Power, Chip Scale, 10-Bit SD/HD Video Encoder

ADV7390/ADV7391/ADV7392/ADV7393
DIGITAL INPUT/OUTPUT SPECIFICATIONS—3.3 V
VDD = 1.71 V to 1.89 V, PVDD = 1.71 V to 1.89 V, VAA = 2.6 V to 3.465 V, VDD_IO = 2.97 V to 3.63 V.
All specifications TMIN to TMAX (−40°C to +85°C), unless otherwise noted.
Table 6.
Parameter
Input High Voltage, VIH
Input Low Voltage, VIL
Input Leakage Current, IIN
Input Capacitance, CIN
Output High Voltage, VOH
Output Low Voltage, VOL
Three-State Leakage Current
Three-State Output Capacitance
Conditions
VIN = VDD_IO
ISOURCE = 400 µA
ISINK = 3.2 mA
VIN = 0.4 V, 2.4 V
Min
Typ
Max
2.0
0.8
±10
4
2.4
0.4
±1
4
Data Sheet
Unit
V
V
µA
pF
V
V
µA
pF
DIGITAL INPUT/OUTPUT SPECIFICATIONS—1.8 V
When VDD_IO is set to 1.8 V, all the digital video inputs and control inputs, such as I²C, HS, and VS, should use 1.8 V levels.
VDD = 1.71 V to 1.89 V, PVDD = 1.71 V to 1.89 V, VAA = 2.6 V to 3.465 V, VDD_IO = 1.71 V to 1.89 V.
All specifications TMIN to TMAX (−40°C to +85°C), unless otherwise noted.
Table 7.
Parameter
Input High Voltage, VIH
Input Low Voltage, VIL
Input Capacitance, CIN
Output High Voltage, VOH
Output Low Voltage, VOL
Three-State Output Capacitance
Conditions
ISOURCE = 400 µA
ISINK = 3.2 mA
Min
Typ
0.7 VDD_IO
4
VDD_IO – 0.4
4
Max
0.3 VDD_IO
0.4
Unit
V
V
pF
V
V
pF
MPU PORT TIMING SPECIFICATIONS
VDD = 1.71 V to 1.89 V, PVDD = 1.71 V to 1.89 V, VAA = 2.6 V to 3.465 V, VDD_IO = 1.71 V to 3.63 V.
All specifications TMIN to TMAX (−40°C to +85°C), unless otherwise noted.
Table 8.
Parameter
MPU PORT, I²C MODE¹
SCL Frequency
SCL High Pulse Width, t1
SCL Low Pulse Width, t2
Hold Time (Start Condition), t3
Setup Time (Start Condition), t4
Data Setup Time, t5
SDA, SCL Rise Time, t6
SDA, SCL Fall Time, t7
Setup Time (Stop Condition), t8
Conditions
See Figure 17
Min
Typ
Max
Unit
0
400
kHz
0.6
µs
1.3
µs
0.6
µs
0.6
µs
100
ns
300
ns
300
ns
0.6
µs
1 _{Guaranteed by characterization.}
Rev. H | Page 8 of 108