SSM2141 Datasheet, PDF (6/6 Pages) Analog Devices – High Common-Mode Rejection Differential Line Receiver

SSM2141
MAINTAINING COMMON-MODE REJECTION
In order to achieve the full common-mode rejection capability
of the SSM2141, the source impedance must be carefully
controlled. Slight imbalances of the source resistance will result
in a degradation of DC CMR—even a 5 Ω imbalance will
degrade CMR by 20 dB. Also, the matching of the reactive
source impedance must be matched in order to preserve the
CMRR over frequency.
Figure 1. Precision Difference Amplifier. Rejects
Common-Mode Signal = ^{[E1 +E2 ]} by 100 dB
2
Figure 2. Precision Unity Gain Inverting Amplifier
Figure 3. Precision Summing Amplifier
Figure 5. Suitable Instrumentation Amplifier
Requirements can be Addressed by Using an
Input Stage Consisting of A₁, A₂, R₁ and R₂
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
8-Pin
Epoxy Mini-DIP
P-Suffix (N-8)
0.430 (10.92)
0.348 (8.84)
8
5
0.280 (7.11)
0.240 (6.10)
1
4
0.325 (8.25)
PIN 1
0.060 (1.52)
0.300 (7.62)
0.210 (5.33)
0.015 (0.38)
MAX
0.130
0.160 (4.06)
(3.30)
0.115 (2.93)
MIN
0.022 (0.558) 0.100 0.070 (1.77)
0.014 (0.356) ^(2.54) 0.045 (1.15)
SEATING
PLANE
BSC
0.195 (4.95)
0.115 (2.93)
0.015 (0.381)
0.008 (0.204)
8-Pin Narrow Body SO
S-Suffix (SO-8)
0.1968 (5.00)
0.1890 (4.80)
8
0.1574 (4.00)
0.1497 (3.80) ¹
5
0.2440 (6.20)
4 _{0.2284 (5.80)}
PIN 1
0.0098 (0.25)
0.0040 (0.10)
0.0688 (1.75)
0.0532 (1.35)
0.0196 (0.50)
0.0099 (0.25) ^{x 45°}
SEATING
PLANE
0.0500 0.0192 (0.49)
(1.27) _{0.0138 (0.35)}
BSC
0.0098 (0.25)
0.0075 (0.19)
8°
0° _{0.0500 (1.27)}
0.0160 (0.41)
Figure 4. Precision Summing Amplifier with Gain
–6–
REV. B