SSM2141 Datasheet, PDF (3/6 Pages) Analog Devices – High Common-Mode Rejection Differential Line Receiver

ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Input Voltage¹ . . . . . . . . . . . . . . . . . . . . . . . . Supply Voltage
Output Short-Circuit Duration . . . . . . . . . . . . . . Continuous
Storage Temperature Range
P Package . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . . +300°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Operating Temperature Range . . . . . . . . . . . . –40°C to +85°C
SSM2141
Package Type
␪_JA2
␪_JC
8-Pin Plastic DIP (P)
103
43
Units
°C/W
NOTES
1_{For supply voltages less than ± 18 V, the absolute maximum input voltage is equal}
to the supply voltage.
2_{θJA is specified for worst case mounting conditions, i.e., θJA is specified for device}
in socket for P-DIP package.
ORDERING GUIDE
Model
SSM2141P
SSM2141S
Operating Temperature
Range
Package
Description
XIND (–40°C ≤ T_A ≤ +85°C) 8-Pin Plastic DIP
XIND (–40°C ≤ T_A ≤ +85°C) 8-Pin Narrow Body SO
Package
Option
N-8
SO-8
Typical Performance Characteristics
Small Signal Transient Response
Large Signal Transient Response
Common-Mode Rejection vs. Frequency
Power Supply Rejection vs. Frequency
Total Harmonic Distortion vs. Frequency
REV. B
Dynamic Intermodulation Distortion vs. Frequency
–3–