OP177_06 Datasheet, PDF (5/16 Pages) Analog Devices – Ultraprecision Operational Amplifier

OP177
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Ratings
Supply Voltage
Internal Power Dissipation¹
±22 V
500 mW
Differential Input Voltage
Input Voltage
Output Short-Circuit Duration
Storage Temperature Range
Operating Temperature Range
Lead Temperature (Soldering, 60 sec)
±30 V
±22 V
Indefinite
−65°C to +125°C
−40°C to +85°C
300°C
DICE Junction Temperature (TJ)
−65°C to +150°C
1 _{For supply voltages less than ±22 V, the absolute maximum input voltage is}
equal to the supply voltage.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for worst-case mounting conditions, that is, θJA
is specified for device in socket for PDIP; θJA is specified for
device soldered to printed circuit board for SOIC package.
Table 4. Thermal Resistance
Package Type
8-Lead PDIP (P-Suffix)
8-Lead SOIC (S-Suffix)
θJA
θJC
Unit
103
43
°C/W
158
43
°C/W
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. E | Page 5 of 16