HMC546LP2E Datasheet, PDF (5/13 Pages) Analog Devices – 10 W, Failsafe, GaAs, SPDT Switch 0.2 GHz to 2.7 GHz

Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Rating
Supply Voltage (VDD)
Control Voltage Range (VCTL)
RF Input Power, CW peak¹
Tx Port, VDD = 3 V and VDD = 5 V
Rx Port, VDD = 3 V
Rx Port, VDD = 5 V
Hot Switch
10 V
−0.2 V to VDD to +1 V
40 dBm
24 dBm
29 dBm
24 dBm
Continuous Power Dissipation (PDISS)
Tx Port, VDD = 3 V and VDD = 5 V
Rx Port, VDD = 3 V
Rx Port, VDD = 5 V
Junction to Case Thermal Resistance, θJC
Tx Port, VDD = 3 V and VDD = 5 V
Rx Port, VDD = 3 V
Rx Port, VDD = 5 V
Temperature
1.12 W
73 mW
232 mW
54°C/W
68°C/W
86°C/W
Junction, TJ
Storage
150°C
−65°C to +150°C
Reflow (MSL1 Rating)
260°C
ESD Sensitivity
Human Body Model (HBM)
250 V (Class 1A)
1 _{Maximum input power can be higher when the radio frequency (RF) input is}
pulsed with a duty cycle <100%.
HMC546LP2E
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
Rev. E | Page 5 of 13