EVAL-ADM1023 Datasheet, PDF (5/12 Pages) Analog Devices – Evaluation Board for Microprocessor System Temperature Monitor

Preliminary Technical Data
THE SOFTWARE
The software allows the ADM1023’s functions to be
controlled from the PC via an easy to use interface
operating under the Windows™ environment. The
contents of the devices internal registers can easily be read
or altered through a user-friendly graphics interface, while
the Control Centre window allows the graphing of the
temperature readings.
INSTALLING THE SOFTWARE
To install the software, insert the first disk of the program
software into drive A, click on the Start icon, click on
Run, then type A:setup.exe as the file name. If the 3.5inch
floppy disk drive is not drive “A” then type “X” instead of
“A” where “X” is the drive letter of the 3.5-inch floppy
disk drive.
ARY ^{USING THE SOFTWARE}
When using the software, first ensure the evaluation board
IN is connected to the Parallel Printer Port.
IM ^{L To start the software, select Start-Programs-Analog}
A _{Devices-ADM1023 Eval Software.}
EL ^{IC When the program is started, a startup screen will appear.}
R ^{N Press any key or mouse button to go onto the next step,}
P ^{H which is the Software Initialisation Wizard.}
TEC _DATA ^{Fig 4. Evaluation Software Startup Screen}
EVAL-ADM1023
REV. A
–5–