ADSP-SC589 Datasheet, PDF (46/64 Pages) –

3.6.19 SigmaStudio Connector (P2)
This connector interfaces with SigmaStudio through the EVAL-ADUSB2EBZ board. The connector
is a 0.1" header. The pinout can be found in Appendix B - Schematics.
3.6.20 JTAG Connector (P3)
The JTAG header (P3) provides debug connectivity for the processor. This is a 0.05" shrouded
through-hole connector from SAMTEC (SHF-105-01-L-D-SM-K). This connector mates with ICE-
1000, ICE-2000, and any newer Analog Devices emulators. For more information, see Debug Interface
.
3.6.21 TRACE and JTAG Connector (P7)
The TRACE and JTAG connector (P7) provides connectivity to the processor's trace interface. This is
a MICTOR connector from TYCO (2-5767004-2). At this time, there are no trace pods available.
3.6.22 USB to UART Connector (P8)
Part Description
Manufacturer Part Number
USB Micro-AB
Hirose
ZX62D-AB-5P8
Mating Cable
USB Micro-B to Standard-A cable
3.6.23 USB Connectors (P10–P11)
Part Description
USB Micro-AB
Mating Cable
USB Micro-B to Standard-A or Micro-A to Standard-A receptacle cable
Manufacturer Part Number
Hirose
ZX62D-AB-5P8
ADSP-SC589 EZ-Board® Evaluation System Manual
46