EZLINX-IIIDE-EBZ Datasheet, PDF (12/15 Pages) Analog Devices – ezLINX™Hardware User Guide

iCoupler® Isolated Interface
Development Environment
EXTENDER CONNECTOR
The Hirose FX8 120P-SV(91) extender connector is used for
daughter board connections. This allows for additional
functionality to be added to the ezLINX hardware. Figure 16
ezLINX™Hardware User Guide
shows the circuit implementation of the extender connector J23
and J26. Connector J26 is a three pin header connector and
allows for the CAN1 signals of the ADSP-BF548 to be routed to
an external daughter board.
Figure 16. Extender Connector using Hirose FX8 120P-SV(91)
RS-232 CONSOLE
The RS-232 console connector is used for accessing the console
of the uCLinux kernel running on the ADSP-BF548 processor.
It uses the ADM3202 RS-232 line driver and receiver to connect
to UART1 of the ADSP-BF548. The RS-232 signals connect to a
DB-9 connector, J4. A circuit implementation of the RS-232
console is shown in Figure 17.
Rev. PrA | Page 12 of 15