EZLINX-IIIDE-EBZ Datasheet, PDF (1/15 Pages) Analog Devices – ezLINX™Hardware User Guide

ezLINX™Hardware User Guide
iCoupler®Isolated Interface Development Environment
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
FEATURES
Plug and Play system evaluation
Easy evaluation of eight isolated Physical layer
communication standards
Open source hardware
Open source software
iCoupler® and isoPower® technology
ADSP-BF548 Blackfin Processor running uCLinux
Sample PC application
Sample embedded UCLinux application
64 MB RAM
32 MB Flash
Extender connector for additional functionality
APPLICATIONS
Isolated Interfaces
EVALUATION KIT CONTENTS
One each
EZLINX-IIIDE-EBZ
Power Supply
USB-A to USB Mini B Cable
GENERAL DESCRIPTION
The ezLINX iCoupler Isolated Interface Development
environment provides developers with a cost-effective, plug and
play method for evaluating eight physical Layer, digitally-
isolated communication standards(USB, RS-422, RS-485, RS-
232, CAN, SPI, I2C and LVDS). The Blackfin® ADSP-BF548
processor is used to run the uCLinux operating system and
allows for easy customization through the open source
hardware and software platform. Development time is
significantly reduced for embedded designers and system
architects who are designing and evaluating isolated
communication standards.The Interfaces on ezLINX use ADI's
isolated transceivers with integrated iCoupler and isoPower®
digital isolator technology.
The Hardware of the ezLINX iCoupler isolated interface
development environment contains the ADSP-BF548 Blackfin
processor with 64MB of RAM and 32MB of Flash memory. The
EZLINX-IIIDE-EBZ
Figure 1.
Isolated Physical layer communication standards are
implemented using ADI's isolated transceivers with integrated
iCoupler and isoPower technology. Included are the following:
• Isolated USB using the ADuM3160
• Isolated CAN using the ADM3053 Signal and Power
Isolated CAN transceiver
• Isolated RS-485 and RS-422 using the ADM2587E
Signal and Power Isolated RS-485/RS-422 transceiver
• Isolated RS-232 using the ADM3252E Signal and
Power Isolated RS-232 transceiver
• Isolated I2C using the ADuM1250 and ADuM5000
• Isolated SPI using the ADuM3401, ADuM3402 and
ADuM5000
• Isolated LVDS using the ADuM3442, ADuM5000,
ADN4663 and ADN4664
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. PrA | Page 1 of 15