UG-1071 Datasheet, PDF (1/6 Pages) Analog Devices – Access to all analog and digital pins

ADuCM362/ADuCM363 Getting Started Guide
UG-1071
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
ADuCM362/ADuCM363 Development Systems Getting Started Tutorial
FEATURES
GENERAL DESCRIPTION
ADuCM362/ADuCM363 evaluation board
2 power supply options: 5 V from a USB port connected to
the Segger J-Link OB emulator or 1.8 V to 3.6 V from an
external power supply
On-board resistance temperature detector (RTD) for
temperature measurements
Access to all analog and digital pins
Power and general-purpose LEDs
Reset and download push-buttons
8-pin connector to the Segger J-Link OB emulator
32.768 kHz external crystal
EVALUATION KIT CONTENTS
An evaluation board (EVAL-ADuCM362QSPZ or EVAL-
ADuCM363QSPZ) that facilitates performance evaluation
of the device with minimal external components
An Analog Devices, Inc., Segger J-Link OB emulator (USB-
SWD/UART-EMUZ)
1 USB cable
1 installation DVD
ONLINE RESOURCES
ADuCM362/ADuCM363 data sheet
ADuCM362/ADuCM363 Hardware Reference Manual
The ADuCM362/ADuCM363 development system allows
evaluation of ADuCM362 or ADuCM363 silicon. This quick
start guide introduces the support features and tools supplied
with the ADuCM362/ADuCM363 evaluation kit. In addition,
this guide describes how to connect the evaluation hardware.
The getting started guide works as a tutorial, providing instructions
on how to download third party evaluation software tools.
Instructions are also provided on how to load code examples
supplied with the software tools.
The ADuCM362 is a fully integrated, 4 kSPS, 24-bit data
acquisition system that incorporates dual, high performance
multichannel sigma-delta (Σ-Δ) analog-to-digital converters
(ADCs), a 32-bit ARM® Cortex®-M3 processor, and Flash/EE
memory on a single chip.
The ADuCM362 is designed for direct interfacing to external
precision sensors in both wired and battery-powered applications.
The ADuCM363 contains all the features of the ADuCM362
except for the ADC0, which is removed.
This guide gives users the ability to generate and download user
code for use in unique end system requirements.
Complete specifications for the ADuCM362/ADuCM363 are
provided in the ADuCM362/ADuCM363 data sheet and should
be consulted in conjunction with this user guide when using the
evaluation board.
EVAL-ADuCM362QSPZ/EVAL-ADuCM363QSPZ EVALUATION BOARD
Figure 1.
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 6