AD9575 Datasheet, PDF (1/16 Pages) Analog Devices – Network Clock Generator, Two Outputs

Network Clock Generator, Two Outputs
AD9575
FEATURES
Fully integrated VCO/PLL core
0.39 ps rms jitter from 12 kHz to 20 MHz at 156.25 MHz
0.15 ps rms jitter from 1.875 MHz to 20 MHz at 156.25 MHz
0.40 ps rms jitter from 12 kHz to 20 MHz at 106.25 MHz
0.15 ps rms jitter from 637 kHz to 10 MHz at 106.25 MHz
Input crystal frequency of 19.44 MHz, 25 MHz, or
25.78125 MHz
Pin selectable divide ratios for 33.33 MHz, 62.5 MHz,
100 MHz, 106.25 MHz, 125 MHz, 155.52 MHz, 156.25 MHz,
159.375 MHz, 161.13 MHz, and 312.5 MHz outputs
LVDS/LVPECL/LVCMOS output format
Integrated loop filter
Space saving 4.4 mm × 5.0 mm TSSOP
100 mW power dissipation (LVDS output)
120 mW power dissipation (LVPECL output)
3.3 V operation
APPLICATIONS
GbE/FC/SONET line cards, switches, and routers
CPU/PCI-e applications
Low jitter, low phase noise clock generation
GENERAL DESCRIPTION
The AD9575 provides a highly integrated, dual output clock
generator function including an on-chip PLL core that is
optimized for network clocking. The integer-N PLL design is
based on the Analog Devices, Inc., proven portfolio of high
performance, low jitter frequency synthesizers to maximize line
card performance. Other applications with demanding phase
noise and jitter requirements also benefit from this part.
The PLL section consists of a low noise phase frequency detector
(PFD), a precision charge pump, a low phase noise voltage
controlled oscillator (VCO), and pin selectable feedback and
output dividers.
By connecting an external crystal, popular network output
frequencies can be locked to the input reference. The output
divider and feedback divider ratios are pin programmable for the
required output rates. No external loop filter components are
required, thus conserving valuable design time and board space.
The AD9575 is available in a 16-lead, 4.4 mm × 5.0 mm TSSOP
and can be operated from a single 3.3 V supply. The temperature
range is −40°C to +85°C.
FUNCTIONAL BLOCK DIAGRAM
VDD × 5
XTAL
OSC
AD9575
LDO
VCO
LVDS OR
LVPECL
LVCMOS
SEL
100MHz
TO 312.5MHz
33.33MHz/
62.5MHz/SEL1
GND × 5
Figure 1.
SEL0
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2010 Analog Devices, Inc. All rights reserved.