EVK-ACT8945AQJ303-T Datasheet, PDF (18/42 Pages) Active-Semi, Inc – Advanced PMU for Atmel SAMA5D3 Series & SAM9 Series Processors

ACT8945A
Rev 2, 11-Feb-14
ActivePath^TM CHARGER ELECTRICAL CHARACTERISTICS
(V_CHGIN = 5.0V, T_A = 25°C, unless otherwise specified.)
PARAMETER
ActivePath
CHGIN Operating Voltage Range
CHGIN UVLO Threshold
CHGIN UVLO Hysteresis
CHGIN OVP Threshold
CHGIN OVP Hysteresis
CHGIN Supply Current
CHGIN to VSYS On-Resistance
CHGIN to VSYS Current Limit
VSYS REGULATION
VSYS Regulated Voltage
nSTAT OUTPUT
nSTAT Sink current
nSTAT Leakage Current
ACIN AND CHGLEV INPUTS
CHGLEV Logic High Input Voltage
CHGLEV Logic Low Input Voltage
CHGLEV Leakage Current
ACIN Voltage Thresholds
ACIN Hysteresis Voltage
ACIN Leakage Current
TH INPUT
TH Pull-Up Current
V_TH Upper Temperature Voltage
Threshold (V_THH)
V_TH Lower Temperature Voltage
Threshold (V_THL)
V_TH Hysteresis
TEST CONDITIONS
CHGIN Voltage Rising
CHGIN Voltage Falling
CHGIN Voltage Rising
CHGIN Voltage Falling
V_CHGIN < V_UVLO
V_CHGIN < V_BAT + 50mV, V_CHGIN > V_UVLO
V_CHGIN > V_BAT + 150mV, V_CHGIN > V_UVLO
Charger disabled, I_VSYS = 0mA
I_VSYS = 100mA
ACIN = VSYS
ACIN = GA, CHGLEV = GA
ACIN = GA, CHGLEV = VSYS
I_VSYS = 10mA
V_nSTAT = 2V
V_nSTAT = 4.2V
V_CHGLEV = 4.2V
ACIN voltage rising
ACIN voltage falling
V_ACIN = 4.2V
V_CHGIN > V_BAT + 100mV, Hysteresis = 50mV
Hot Detect NTC Thermistor
Cold Detect NTC Thermistor
Upper and Lower Thresholds
MIN TYP MAX UNIT
4.35
6.0
V
3.1 3.5
3.9
V
0.5
V
6.0 6.6
7.2
V
0.4
V
35
70
µA
100 200 µA
1.3
2.0
mA
0.3
Ω
1.5
2
A
80
90
100
mA
400 450 500
4.45 4.6
4.8
V
4
8
12 mA
1
µA
1.4
V
0.4
V
1
µA
1.03 1.2 1.31 V
200
mV
1
µA
91 102 110 µA
0.47 0.50 0.53 V
2.44 2.51 2.58
V
30
mV
Innovative Power^TM
- 18 -
Active-Semi Proprietary―For Authorized Recipients and Customers
ActivePMU^TM and ActivePath^TM are trademarks of Active-Semi.
I²C^TM is a trademark of NXP.
www.active-semi.com
Copyright © 2014 Active-Semi, Inc.