APA075-TQ144I Datasheet, PDF (40/174 Pages) Actel Corporation – Ultra-Fast Local and Long-Line Network

ProASIC^PLUS Flash Family FPGAs
Table 1-21 • DC Electrical Specifications (V_DDP = 2.5 V ±0.2V)
Commercial/Industrial/
Military/MIL-STD-883^{1, 2}
Symbol Parameter
Conditions
Min.
Typ.
Max. Units
V_OH
Output High Voltage
High Drive (OB25LPH)
Low Drive (OB25LPL)
V_OL
Output Low Voltage
High Drive (OB25LPH)
Low Drive (OB25LPL)
V_IH6
Input High Voltage
V_IL7
Input Low Voltage
R_WEAKPULLUP Weak Pull-up Resistance
(OTB25LPU)
I_OH = –6 mA
I_OH = –12 mA
I_OH = –24 mA
I_OH = –3 mA
I_OH = –6 mA
I_OH = –8 mA
I_OL = 8 mA
I_OL = 15 mA
I_OL = 24 mA
I_OL = 4 mA
I_OL = 8 mA
I_OL = 15 mA
V_IN ≥ 1.25 V
2.1
2.0
1.7
V
2.1
1.9
1.7
0.2
0.4
0.7
V
0.2
0.4
0.7
1.7
V_DDP + 0.3 V
–0.3
0.7
V
6
56
kΩ
HYST
Input Hysteresis Schmitt
See Table 1-4 on page 1-9
0.3
0.35
0.45
V
I_IN
Input Current
with pull up (V_IN = GND)
–240
– 20
µA
without pull up (V_IN = GND or V_DD)
–10
10
µA
I_DDQ
Quiescent Supply Current
V_IN = GND⁴ or V_DD
(standby)
Commercial
Std.
5.0
15
mA
–F³
5.0
25
mA
I_DDQ
Quiescent Supply Current
V_IN = GND⁴ or V_DD
(standby)
Industrial
Std.
5.0
20
mA
I_DDQ
Quiescent Supply Current
V_IN = GND⁴ or V_DD
(standby)
Military/MIL-STD-883
Std.
5.0
25
mA
I_OZ
Tristate Output Leakage Current V_OH = GND or V_DD
Std. –10
–F^{3, 5} –10
10
µA
100
µA
Notes:
1. All process conditions. Commercial/Industrial: Junction Temperature: –40 to +110°C.
2. All process conditions. Military: Junction Temperature: –55 to +150°C.
3. All –F parts are available only as commercial.
4. No pull-up resistor.
5. This will not exceed 2 mA total per device.
6. During transitions, the input signal may overshoot to V_DDP +1.0V for a limited time of no larger than 10% of the duty cycle.
7. During transitions, the input signal may undershoot to -1.0V for a limited time of no larger than 10% of the duty cycle.
1-36
v5.2