ACE25C100G Datasheet, PDF (14/37 Pages) ACE Technology Co., LTD. – Uniform Sector Dual and Quad Serial Flash

ACE25C100G
Uniform Sector Dual and Quad Serial Flash
Dual Output Fast Read (3BH)
The Dual Output Fast Read command is followed by 3-byte address (A23-A0) and a dummy byte,
each bit being latched in during the rising edge of SCLK, then the memory contents are shifted out
2-bit per clock cycle from SI and SO. The command sequence is shown in followed Figure8. The first
byte addressed can be at any location. The address is automatically incremented to the next higher
address after each byte of data is shifted out.
Figure8. Dual Output Fast Read Sequence Diagram
VER 1.4 14