|
ACE25C100G Datasheet, PDF (1/37 Pages) ACE Technology Co., LTD. – Uniform Sector Dual and Quad Serial Flash | |||
|
ACE25C100G
Uniform Sector Dual and Quad Serial Flash
Description
The ACE25C100G Serial flash supports the standard Serial Peripheral Interface (SPI), and supports
the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI),I/O1 (SO), I/O2 (WP#), and I/O3
(HOLD#). The Dual I/O data is transferred with speed of 216Mbits/s and the Quad I/O & Quad output
data is transferred with speed of 432Mbits/s.
Features
ï¬ 1M-bit Serial Flash
-128K-byte
-256 bytes per programmable page
ï¬ Standard, Dual, Quad SPI
-Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
-Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#
-Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
ï¬ High Speed Clock Frequency
-108MHz for fast read with load
-Dual I/O Data transfer up to 216Mbits/s
-Quad I/O Data transfer up to 432Mbits/s
ï¬ Software/Hardware Write Protection
-Write protect all/portion of memory via software
-Enable/Disable protection with WP# Pin
-Top or Bottom, Sector or Block selection
ï¬ Minimum 100,000 Program/Erase Cycles
ï¬ Program/Erase Speed
-Page Program time: 0.7ms typical
-Sector Erase time: 100ms typical
-Block Erase time: 0.3/0.5s typical
-Chip Erase time: 1s typical
ï¬ Flexible Architecture
-Sector of 4K-byte
-Block of 32/64k-byte
ï¬ Low Power Consumption
-20mA maximum active current
-5uA maximum power down current
ï¬ Advanced security Features(1)
-3*256-Byte Security Registers With OTP Lock
ï¬ Voltage, Temperature Range
-Full voltage range: 2.7~3.6V
-40â to 85â operating range
VER 1.4 1
|
▷ |