Z86L79 Datasheet, PDF (6/58 Pages) Zilog, Inc. – Low-Voltage Microcontroller

Z86L79/80
Low-Voltage Microcontroller
ABSOLUTE MAXIMUM RATINGS
Sym
Description
Min
V_CC
T _STG
T_A
Supply Voltage (*)
Storage Temp.
Oper. Ambient
Temp.
–0.3
–65°
Notes:
* Voltage on all pins with respect to GND.
† See Ordering Information.
Max
+7.0
+150 °
†
Units
V
C
C
Zilog
Stresses greater than those listed under Absolute Maxi-
mum Ratings may cause permanent damage to the de-
vice. This is a stress rating only; operation of the device at
any condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to ab-
solute maximum rating conditions for an extended period
may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (Figure 5).
From Output
Under Test
I
150 pF
Figure 5. Test Load Diagram
CAPACITANCE
T_A = 25°C, V_CC = GND = 0V, f = 1.0 MHz, unmeasured pins returned to GND.
Parameter
Input capacitance
Output capacitance
I/O capacitance
Max
12 pF
12 pF
12 pF
3-6
PRELIMINARY