Z86319 Datasheet, PDF (5/23 Pages) Zilog, Inc. – PS/2 MOUSE CONTROLLER

Zilog
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to
Ground. Positive current flows into the referenced pin
(Figure 4).
From Output
Under Test
Z86319
PS/2 Mouse Controller
1
I
150 pF
ABSOLUTE MAXIMUM RATINGS
Sym Parameter
Min
Max
V_DD
T_STG
T_A
Supply Voltage*
Storage Temp
Oper Ambient
Temp
–0.3
–65°
0°
+7
+150°
40°
Notes:
*Voltages on all pins with respect to Ground.
Units
V
C
C
Figure 4. Test Load Diagram
Stresses greater than those listed under Absolute Maxi-
mum Ratings may cause permanent damage to the device.
This rating is a stress rating only; operation of the device
at any condition above those indicated in the operational
sections of these specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods
may affect device reliability.
CAPACITANCE
T_A = GND = 0V, f = 1.0 MHz, unmeasured pins returned to Ground.
Parameter
Input Capacitance
Output Capacitance
I/O Capacitance
Min
Max
0
10 pF
0
20 pF
0
25 pF
V_CC SPECIFICATION
V_CC = 4.5V to 5.5V
Using the precision RC oscillator feature, f = 4.0 MHz ±10% under the following conditions:
s V_CC = 5.0V ±10%
s Temp 0 to 40°C
s Application board capacitance:
– 2.0 pF max.
– 0.5 pF min.
DS97KEY1605
PRELIMINARY
5