Z86127 Datasheet, PDF (4/8 Pages) Zilog, Inc. – LOW-COST DIGITAL TELEVISION CONTROLLER (LDTC)

ABSOLUTE MAXIMUM RATINGS
Stresses greater than those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; operation of the device at any
condition above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods
may affect device reliability.
Symbol
Parameters
V_CC
Power Supply Voltage*
V_I
Input Voltage
V_I
Input Voltage
V_O
Output Voltage
I_OH
Output Current High
I
Output Current High
OH
I_OL
Output Current Low
I
Output Current Low
OL
I_OL
Output Current Low
T_A
Operating Temperature
T
Storage Temperature
STG
Notes:
[1] Port 2 open drain
[2] PWM open-drain outputs
[3] Port 5
* Voltage on all pins with respect to GND.
† See Ordering Information
Min
Max
Units
Notes
-0.3
+7
V
-0.3
V_CC+0.3
V
-0.3
V_CC+0.3
V
-0.3
V_CC+8.0
V
-10
mA
[1]
[2]
1 pin
-100
mA
All total
20
mA
1 pin
40
mA
[3] (1 pin)
200
mA
All total
†
-65
+150
C
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (Test Load
Diagram).
From Output
Under Test
VDD
RLL
150 pF
RLH
CAPACITANCE
T_A=25°C; V_CC=GND=0V; Freq=1.0 MHz; unmeasured pins to GND.
Parameter
Input capacitance
Output capacitance
I/O capacitance
AFC_IN input capacitance
Max
Units
10
pF
20
pF
25
pF
10
pF
4
Test Load Diagram