Z16FMC Datasheet, PDF (18/26 Pages) Zilog, Inc. – USB Smart Cable with opto-isolator

Z16FMC™ Series Motor Control Development Kit
User Manual
12
Recheck Procedures with the Quick Start Guide
Follow the procedures in the Z16FMC^™ Series Motor Control Development Kit Quick
Start Guide (QS0079) – contained in the kit – and verify that the kit is set up as specified
in the document.
Zilog Customer Support Contact
For additional troubleshooting solutions, refer to ZDS II Online Help. For valuable infor-
mation about customer and technical support, as well as hardware and software develop-
ment tools, visit the Zilog website at www.zilog.com, where you’ll also find the latest
released versions of ZDS II.
Linix Motor Wiring Information
The Linix 3-phase motor included with the development kit provides three heavy-gauge
wires for phase connections and five light-gauge wires used to power and access internal
sensors, as indicated in Table 4.
Table 4. 3-Phase Motor Wiring Information
Wire
Heavy-gauge white wire
Heavy-gauge blue wire
Heavy-gauge green wire
Light-gauge red wire
Light-gauge black wire
Light-gauge white wire
Light-gauge blue wire
Light-gauge green wire
Description
Motor Phase A connection
Motor Phase B connection
Motor Phase C connection
Sensor power V_CC (+)
Sensor power ground (-)
Sensor signal S_A
Sensor signal S_B
Sensor signal S_C
Linix Motor Wiring Information
UM023402-0811